DS-K1T671TM-3XF face recognition terminal is an access control device integrated with temperature screening function. It can fast taking skin-surface temperature and upload abnormal temperature event to the center, which can be widely applied in multiple scenarios, such as enterprises, stations, dwellings, factories, schools, campus and so on.
Supports Vanadium Oxide uncooled sensor to measure target's temperature
Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C
Recognition distance: 0.5 to 1.5 m
Fast temperature measurement mode: Detects face and takes temperature without identity authentication
Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
Displays temperature measurement results on the authentication page
Triggers voice prompt when detecting abnormal temperature
Configurable door status (open/close) when detecting abnormal temperature
Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
50,000 face capacity, 50,000 card capacity, and 100,000 event capacity
Suggested height for face recognition: between 1.4 m and 1.9 m
Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
Connects to external access controller or Wiegand card reader via Wiegand protocol
Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
* Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
* In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.